Static Image Analysis · Powders & Suspensions
BeVision S1 is a multi-purpose particle size and shape analyzer that applies static image analysis (SIA) to powders and suspensions. Its choice of biological or metallurgical microscope, combined with dry and wet measurement modes and 34-parameter analysis, covers a broad range of applications across pharmaceutical, ceramic, chemical, and mineral industries.
34 Parameters
BeVision S1 calculates 34 size and shape parameters in every measurement. Beyond particle size distribution, morphology, roundness, elongation, and contour concavity are all captured simultaneously.
BeVision Software
BeVision software generates histograms, scatter plots, and cumulative curves. Measurement history is stored; SOP settings can be saved so that the same sample can be re-analyzed from the image archive without re-scanning.
Application Scope
Application Areas
Technical Specifications
| Parameter | Value |
|---|---|
| Measurement Principle | Static Image Analysis (SIA) |
| Microscope Type | Biological or Metallurgical (user selection) |
| Light Source | White LED + Halogen lamp (optional) |
| Objective Lenses | 4×, 10×, 40×, 100× (40× digital magnification) |
| Camera | CMOS, 5 MP |
| Measurement Range | 0.3–4,500 μm (biological) / 0.1–2,700 μm (metallurgical) |
| Measurement Modes | Dry powder and wet suspension |
| Typical Measurement Time | 3–5 minutes |
| Size Classes | 100 (user-defined) |
| Number of Parameters | 34 size and shape parameters |
| ISO Standards | ISO 13321, ISO 9276 |
| Dimensions (W × D × H) | 20.0 × 42.0 × 55.0 cm |
| Weight | 8.0 kg |
| Power Input | 100–240 VAC, 50/60 Hz |
| Optional Accessory | BT-910 Dry Powder Disperser |
Frequently Asked Questions
With the biological microscope option, the range is 0.3–4,500 μm; with the metallurgical option, 0.1–2,700 μm. Resolution can be optimised by selecting the appropriate objective lens (4×, 10×, 40×, or 100×) combined with 40× digital magnification.
The biological microscope works with transmitted light, making it suitable for transparent or semi-transparent samples such as suspensions, emulsions, and biological materials. The metallurgical microscope uses reflected light and is preferred for opaque powders, metal particles, and ceramics. The measurement range also differs between the two configurations.
Yes. BeVision S1 handles dry powder samples directly on a slide as well as wet suspensions prepared as thin slide preparations. Both methods yield the same 34-parameter dataset, allowing direct comparison between measurement modes.
A saved standard operating procedure (SOP) locks in the image acquisition and analysis settings for a given sample type. When re-analysis is needed, the existing image archive is used instead of re-scanning — different analysis parameters can be tested without preparing or measuring the sample again. This significantly reduces time during method development and validation.
The S1 is a versatile system for powders, granules, and suspensions; its compact design and biological microscope option make it well suited to general laboratory use. The M1 is purpose-built for filter cleanliness, film inspection, and surface contamination — featuring automated scanning mode, a larger 55 × 55 mm scan area, and a 12 MP camera. Contact Anka Analitik to identify which model fits your application.
Quote & Information
Contact our team for a demo request, sample analysis, or technical consultation. Over 25 years of experience in analytical instrumentation — at your service.
