Air Jet Sieve
The Air Sizer 200 is an air jet sieve designed for single-fraction analysis of fine dry powders. Starting from 20 µm, it delivers the precision that vibration sieve shakers cannot achieve with electrostatic or cohesive materials. A rotating air stream disperses the sample, keeps mesh apertures clear, and produces reproducible results in minimal time.
Operating Principle
Where conventional vibration sieve shakers fall short — in very fine and electrostatic powders — the Air Sizer 200's air jet system delivers reproducible results.
Application Areas
Frequently Asked Questions
The Air Sizer 200 sieves dry powders with particle sizes between 20 µm and ~4 mm. It is especially suited for electrostatic and cohesive materials — including pharmaceuticals, ceramics, pigments, coatings, and food powders — where reproducible results are critical.
A vibration sieve shaker uses mechanical shaking to move particles through the mesh. The Air Sizer 200 uses a rotating air stream beneath the sieve to fluidize and disperse the sample. This prevents agglomeration in fine or electrostatic powders, keeps mesh apertures clear, and delivers accurate results significantly faster.
The Air Sizer 200 is compatible with standard 200 mm (8 inch) diameter test sieves. One sieve is used per analysis run, covering a broad particle size range from 20 µm to approximately 4 mm.
No. The Air Sizer 200 has no rotating mechanical parts. The air jet system minimizes powder entry into internal components, keeping the unit clean. An optional pre-filter and industrial vacuum accessories further support long-term, trouble-free operation.
Yes. The Air Sizer 200 is designed exclusively for dry sieving. Wet sieving is not supported. An optional cyclone separator and industrial vacuum connection are available to improve fine powder capture efficiency.
Quote & Information
Contact our technical team for consulting, demo requests, or pricing. We have been supporting analytical laboratories across Türkiye for over 25 years.
